5 mm LED, diffused red
A little light. It needs a resistor so it doesn't burn out.
Standard through-hole LED, 660 nm, 1.85-2.5 V forward at 20 mA, 60° diffused. Long leg is the anode (+). Always drive through a series resistor.
Electrical
- Supply voltage
- 1.85 to 2.5 V
- Current
- 15 mA typical, 20 mA max
- Talks over
- digital, pwm
Needs alongside it
- 220-330 Ω on a 5 V board, 100-150 Ω on a 3.3 V board.
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| anode | digital, PWMLong leg (+), via the resistor to a GPIO. | ||
| cathode | groundShort leg (-), flat side of the rim. |
Size and material
- Size
- 6 × 9 × 6 mm
- Material
- led
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W




