SH1106 1.3" OLED, 128x64, I2C
A bigger version of the tiny screen, easier to read from across a desk.
Larger 1.3" monochrome OLED on a 4-pin I2C module, address 0x3C. Uses the SH1106 controller (U8g2 or Adafruit_SH110X library, not the SSD1306 one). 3.3-5 V. Pin order varies by maker: check VCC and GND before wiring.
Electrical
- Supply voltage
- 3.3 to 5 V
- Logic level
- 3.3 V
- Current
- 25 mA typical, 40 mA max
- Talks over
- i2c
- I2C address
- 0x3C, 0x3D
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| VCC | 3.3 V, 5 V | ||
| GND | ground | ||
| SCL | I2C clock | ||
| SDA | I2C data |
Size and material
- Size
- 35 × 10 × 30 mm
- Weight
- 6 g
- Material
- screen
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W


